Aluma Vault - Curved and Flat Metal Ceilings

Aluma-Vault is a 3-dimensional, decorative metal ceiling system that utilizes extruded aluminum to create curved, undulating, sloped, and flat ceiling applications. Three systems are available to meet your ceiling requirements.

Beam Baffle - Brakeformed - Open Plenum Beam Baffle Ceilings

Brakeformed Beam Baffle is a vertical linear plenum mask that provides an attractive appearance for acoustical or non-acoustical ceiling applications.

Beam Baffle - Extruded - Open Plenum Beam Baffle Ceilings

Beam Baffle is an extruded aluminum beam ceiling system that creates a linear plenum mask, while leaving an open plenum for HVAC and fire protection

Beam Mate - Metal Beam Ceilings

Beam-Mate is an extruded aluminum beam ceiling system that provides an economical solution for your open cell beam and decorative beam metal ceiling requirements. The system gives definition to the ceiling space, yet retains convenience in the maintenance if open plenums are required.

Ceiling Suspension

Many extruded aluminum ceiling suspension systems are available and suitable for any market environment. No other manufacturer has more suspension design options than Gordon.

Cleanroom Grid

Cleanroom Grid is an extruded aluminum suspension system commonly used in such applications as semiconductor, microelectronics, aerospace, food service, food processing, pharmaceutical, and hospital industries.

Column Collars

Column Collars are curved angle extrusions used to create transitions between columns or perimeters and acoustical tile, perforated and non-perforated metal panels, and drywall. They can be finished to match the ceiling suspension of your choice.

Contura - Perimeter Trims

Contura is designed to create a perimeter within or below a ceiling area, and is used in conjunction with ceiling grid, open cell beam systems, panels and lighting to accentuate or isolate various ceiling areas. Profiles for acoustical drywall applications are available.

Corrugated Metal Ceilings / Acoustics

ALPRO offers unlimited design options for corrugated metal acoustical ceilings.

Custom Suspension

Gordon differentiates themselves from the competition by aiding the architectural and design community and creating unique yet economical suspension systems. Over the years, Gordon has helped many customers achieve their design objectives.

Environmental Grid

Gordon offers a variety of environmental grid systems. Our snap-tab system is provided for ease of installation, while the clip system is available to meet seismic requirements.

Fin Mate - Metal Baffle Ceilings

Fin Mate is an extruded aluminum vertical blade metal ceiling system that creates a linear plenum mask, while leaving an open plenum for HVAC and fire protection.

Gasketed Grid

CG Grid is commonly used in such applications as semiconductor, microelectronics, aerospace, food service, food processing, pharmaceutical, and hospital industries. RG System applications are the same as the CG System, however the RG system differs from the CG system in that the 1 - 1/2" extruded aluminum face tee is designed with an upturned flange. Panels or filters contact the gasket to complete a seal prior to settling on the tee flange for a sharp architectural detail.

Hook-On Accessible Metal Panel Ceilings

HOOK-ON metal ceilings are installed to rigid, wire-hung, heavy-duty extruded aluminum suspension, providing a monolithic, accessible ceiling system with no black iron requirement.

Lay-In Panel Ceilings

Lay-in panels can be manufactured to the module size of your choice, perforated or non-perforated, and lay-in one Gordon’s many suspension options.

Lay-In Metal Panels

Square Edge, Reveal Edge, and Flush Edge Lay-In Metal Panels are manufactured to accomodate 2' x 2' or 2' x 4' module sizes.

Marquis™ Linear Metal Panel Ceilings

Marquis is a linear panel ceiling system that is provides a crisp appearance for interior and exterior applications.

MILLENNIUM® Metal Ceilings

MILLENNIUM ceiling systems utilize extruded aluminum grid along with MILLENNIUM panels to create curved, undulating, and flat ceiling applications.

Perimeter Pockets

Gordon's extruded aluminum and brake form (aluminum or steel) perimeter pockets are used for ceiling transitions to perimeter wall and window systems. They can also be used for the concealing blinds, curtains, draperies, and screens; air return or air supply, and perimeter lighting.

Secure Ceilings

Secure ceiling systems feature a modular, grid based construction for quick and easy installation with panels that lock into place for a tamper resistant ceiling system.

Series Grid

Gordon offers narrow line extruded aluminum suspension systems to create clean and crisp grid lines for bolt slot, screw slot, and flush face applications.

Sky Mate

Sky Mate systems provide an excellent, inexpensive, natural skylight alternative anywhere within a building. It is particularly well suited for retail stores, restaurants, lobbies, grocery stores, shopping malls, executive offices, and conference rooms.


Turn-Key tab and slot metal wall and ceiling systems provide concealed attachments and are designed and engineered for quick, easy. and low cost installation.

Wall Angle

Use Gordon’s wall angle to create a smooth transition from ceiling to wall applications. Gordon offers over 60 profiles of wall angles and perimeter trims to choose from.