Final Forms II Installation Guide

FINAL FORMS II UN I QUE T R IMS A ND SH A P E S I N PR E F I N I SHED A L UM I NUM INSTALLATION GUIDE 1. Install building paper behind/under all trims. 2. Attach trim 8" O.C. maximum with screws. 3. Install wire lath over nailing flange of trim. 4. On horizontal applications and vapor barrier applications install building paper over upper nailing flange of trim. 5. Apply sealant to all joints and along seams of factory fabricated intersections and corners. (For exterior vapor barrier applications, use optional splice clips with sealant for alignment when installing continuous lengths of Final Forms II R series.) 6. Clean plaster from exposed portions of trim immediately or use masking to protect trim during plastering. Plaster left to dry on the finished surface will stain the finish. Do not apply adhesive masking to pre-painted trims for longer than 24 hours. Release sheets are available for most trims for use in lieu of adhesive masking. 7. Trims can be cut with a chop saw using a fine tooth saw blade. Use a lubricant or a grease stick on the blade prior to cutting. FINAL FORMS II features a tapered fin punched 8" O.C. for attachment to wall. Pre-applied to a wall, they offer concealed fastening of protective and decorative aluminum trim edging. I N S T A L L A T I O N I N S T RU C T I O N S 5023 HAZEL JONES ROAD, BOSSIER CIT Y, LA 71111 STUD SCREW FINAL FORMS II SERIES R PLASTER CHANNEL SCREED METAL LATH PLASTER FINAL FORMS II SERIES S DRYWALL STUD BUILDING PAPER PLASTER SCREW METAL LATH BUILDING PAPER  GORDON - I NC .COM 80 0 . 747. 895 4 FA X 80 0 . 87 7. 8746